|
11 - STEEL WORK |
|
Sl No |
Description |
Unit |
Rate |
|
|
|
|
|
|
|
303 |
Supplying and fixing steel rolling shutter of approved make, made of
required size of M.S. laths interlocked together through their entire
length and jointed together at the end by end locks mounted on
specially designed pipe shaft with brackets, side guides and
arrangements for inside and outside locking with push and pull
operation complete including the cost of providing and fixing
nescessary wire spring and M.S. top cover. |
sqm |
Rs.1,825.90 |
|
|
|
(Rupees one thousand eight hundred twenty five and paise ninety) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
304 |
Extra for providing mechanical device, chain and crank operation for
operating rolling shutters - |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Exceeding 10.00 sqm and upto 16.80 sqm in area. |
sqm |
Rs.364.70 |
|
|
|
|
(Rupees three hundred sixty four and paise seventy) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Exceeding 16.80 sqm in area. |
sqm |
Rs.493.90 |
|
|
|
|
|
(Rupees four hundred ninety three and paise ninety) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
305 |
Providing and fixing in position collapsible steel shutters with
vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm
size with top and bottom rails of T-iron 40x40x6mm with 40mm dia.
steel pulleys complete with bolts, nuts, locking arrangement,
stoppers, handles, including applying a priming coat of approved steel
primer. |
sqm |
Rs.2,780.60 |
|
|
|
(Rupees two thousand seven hundred eighty and paise sixty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
306 |
Providing and fixing steel glazed doors, windows, ventilators of
standard rolled steel sections, joints, mitered and welded with 15x3mm
lugs 10cm long embedded in cement concrete blocks 15x10x10cm size of
1:3:6 (1 cement : 3 coarse sand : 6 stone
aggregate 20mm nominal size) or with
wooden plugs and screws or rawl plugs and screws or with fixing clips
or with bolts and nuts as required, including providing and fixing of
glass panes with glazing clips and special metal sash putty of
approved make complete including applying a priming coat of approved
steel primer excluding the cost of metal beading and other fittings
except necessary hinges or pivots as required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 3mm thick glass panes. |
sqm |
Rs.1,618.90 |
|
|
|
|
|
(Rupees one thousand six hundred eighteen and paise ninety) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 4mm thick glass panes. |
sqm |
Rs.1,719.30 |
|
|
|
|
|
(Rupees one thousand seven hundred nineteen and paise thirty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Using 5mm thick glass panes. |
sqm |
Rs.1,776.00 |
|
|
|
|
|
(Rupees one thousand seven hundred seventy six) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(d) |
Using 4mm thick frosted glass panes. |
sqm |
Rs.1,757.70 |
|
|
|
|
(Rupees one thousand seven hundred fifty seven and paise seventy)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
307 |
Providing and fixing steel glazed fixed windows, ventilators of
standard rolled steel sections, joints, mitered and welded with 15x3mm
lugs 10cm long embedded in cement concrete blocks 15x10x10cm size of
1:3:6 (1 cement : 3 coarse sand : 6 stone
aggregate 20mm nominal size) or with
wooden plugs and screws or rawl plugs and screws or with fixing clips
or with bolts and nuts as required, including providing and fixing of
glass panes with glazing clips and special metal sash putty of
approved make complete including applying a priming coat of approved
steel primer excluding the cost of metal beading and other fittings. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 3mm thick glass panes. |
sqm |
Rs.1,569.90 |
|
|
|
|
|
(Rupees one thousand five hundred sixty nine and paise ninety) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 4mm thick glass panes. |
sqm |
Rs.1,670.30 |
|
|
|
|
|
(Rupees one thousand six hundred seventy and paise thirty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Using 5mm thick glass panes. |
sqm |
Rs.1,727.00 |
|
|
|
|
|
(Rupees one thousand seven hundred twenty seven) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(d) |
Using 4mm thick frosted glass panes. |
sqm |
Rs.1,708.70 |
|
|
|
|
|
(Rupees one thousand seven hundred eight and paise seventy) only. |
|
|
|
|
|
|
308 |
Providing and fixing M.S. Grills with 16mm flats M.S. of desired
sections, fixed and welded in position in the pre-fabricated
steel framed windows etc. including applying priming coat etc.
complete. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 3mm thick section. |
sqm |
Rs.967.60 |
|
|
|
|
|
(Rupees nine hundred sixty seven and paise sixty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 4mm thick section. |
sqm |
Rs.1,036.40 |
|
|
|
|
|
(Rupees one thousand thirty six and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Using 5mm thick section. |
sqm |
Rs.1,444.40 |
|
|
|
|
|
(Rupees one thousand four hundred forty four and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
309 |
Providing and fixing M.S. Grills with 16mm flats M.S. of desired
sections, fixed with screws in position in wooden frames of windows
etc. including applying priming coat of approved steel primer etc.
complete. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 3mm thick section. |
sqm |
Rs.882.50 |
|
|
|
|
|
(Rupees eight hundred eighty two and paise fifty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 4mm thick section. |
sqm |
Rs.945.70 |
|
|
|
|
|
(Rupees nine hundred forty five and paise seventy) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Using 5mm thick section. |
sqm |
Rs.1,320.20 |
|
|
|
|
|
(Rupees one thousand three hundred twenty and paise twenty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
310 |
Providing and fixing M.S. grills of required pattern in wooden frames
of windows, etc. with M.S. flats, square or round bars etc. complete. |
kg |
Rs.53.00 |
|
|
|
(Rupees fifty three) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
311 |
Structural steel work rivetted or bolted in built up sections, trusses
and framed works, including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer all complete.
(in tees, R.S. joists, angles, flats and
channels.) |
kg |
Rs.49.90 |
|
|
|
(Rupees forty nine and paise ninety) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
312 |
Structural steel work welded in built up sections, trusses and framed
works, including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer all complete.
(in tees, R.S. joists, angles, flats and
channels.) |
kg |
Rs.56.90 |
|
|
|
(Rupees fifty six and paise ninety) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
313 |
Providing and fixing M.S tubular section in built up section of truss
welded in position including cutting, hoisting, fixing in position and
applying priming coat with approved steel primer etc. complete. |
kg |
Rs.66.40 |
|
|
|
(Rupees sixty six and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
314 |
Supplying and fixing M.S. decorative railing 80cm high in staircase
consisting of 25mm alluminium square sections inserted into 20mm dia.
M.S. bars @ 30 cm centres 60 x 60 x 4mm thick plate at the base fixed
with wooden wedge by I.W. screws to receive the wooden handrails
12.5cm x 10cm including cost of polishing the wooden rail. |
Rm |
Rs.824.50 |
|
|
|
(Rupees eight hundred twenty four and paise fifty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
315 |
Providing and fixing hand railing of 40mm nominal bore GI pipe with
ballustards of 16mm dia HYSD bars placed at 10cm spacing welded
together and a minimum height of 0.8m for staircase railing, balcony
railing, parapet railing etc. including applying steel priming coat
and steel painting complete. |
Rm |
Rs.671.40 |
|
|
|
(Rupees six hundred seventy one and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
316 |
Providing and fixing prefabricated M.S. equal angle in chaukhat for
doors, windows and clerestory windows including fixing with 40 x 5mm
M.S holdfast 40cm long at required spacing and applying priming coat
with approved steel primer etc. complete. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 50 x 50 x 5mm M.S. angle. |
Rm |
Rs.242.90 |
|
|
|
|
|
(Rupees two hundred forty two and paise ninety) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 50 x 50 x 6mm M.S. angle. |
Rm |
Rs.268.80 |
|
|
|
|
|
(Rupees two hundred sixty eight and paise eighty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
317 |
Providing and fixing swing doors, windows and ventilators fabricated
from Roll formed sections made of pre-painted steel including handle
made of high grade alluminium powder coated and with nylon receiver,
gaskets made of ethyl propylene diamine monomer, corner brackets made
of CRCA with zinc phosphating, mullion caps made of glass filled
nylon, frames fixed by using self expanding screws but excluding cost
of glasses. (base steel as per IS : 513 of 0.6mm thick 'D' quality,
galvanised as per IS : 277 with zinc of 150 GM/sqm. Sections for
shutters should be 46x46mm and external frame should be 46x52mm,
section for glass beading should be 18x25mm and centre mullion should
be 46x70mm). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Doors. |
sqm |
Rs.2,711.50 |
|
|
|
|
|
(Rupees two thousand seven hundred eleven and paise fifty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Windows / combined windows & ventilators. |
sqm |
Rs.2,651.20 |
|
|
|
|
(Rupees two thousand six hundred fifty one and paise twenty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Ventilators only. |
sqm |
Rs.3,893.30 |
|
|
|
|
|
(Rupees three thousand eight hundred ninety three and paise thirty)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
318 |
Providing and fixing curtain glazing fabricated from Roll formed
sections made of pre-painted steel including fixing with gaskets made
of ethyl propylene diamine monomer, corner brackets made of CRCA with
zinc phosphating, mullion caps made of glass filled nylon, frames
fixed by using self expanding screws but excluding cost of
glasses.(base steel as per IS : 513 of 0.8mm thick 'D' quality,
galvanised as per IS : 277 with zinc of 150 GM/sqm. Sections for
external should be 46x52mm, centre mullion should be 46x70mm and for
fixing glass should be 18x25mm). |
sqm |
Rs.2,717.40 |
|
|
|
(Rupees two thousand seven hundred seventeen and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
319 |
Providing and fixing structural glazing fabricated from Roll formed
sections made of pre-painted steel including fixing with self
expanding screws but excluding cost of glasses (base steel as per IS :
513 of 0.6mm thick 'D' quality, galvanised as per IS : 277 with zinc
of 150 GM/sqm. Sections should be 50x100mm for verticals 33x58mm for
horizontals and glass holding sections should be 32.5x37mm for top and
bottom grids, in between should be 32.5x18mm), the glass holding
section made of 304 grade stainless steel of 0.8mm thick. CRCA
sections with polyurithene coating are to be used as stiffeners inside
the PPS sections as per design requirement. |
sqm |
Rs.3,832.40 |
|
|
|
(Rupees three thousand eight hundred thirty two and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
320 |
Providing and fixing a pair of flat iron brackets in concrete work
while laying for jointing with timber post etc. including cost of
bolts and nuts complete. |
pair |
Rs.73.50 |
|
|
|
(Rupees seventy three and paise fifty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
