|
11 - STEEL WORK |
|
Sl No |
Description |
Unit |
Rate |
|
|
|
|
|
|
|
303 |
Supplying and fixing steel rolling shutter of approved make,
made of required size of M.S. laths interlocked together through
their entire length and jointed together at the end by end locks
mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with push
and pull operation complete including the cost of providing and
fixing nescessary wire spring and M.S. top cover. |
sqm |
Rs.2,124.70 |
|
|
|
(Rupees two thousand one hundred twenty four and paise seventy)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
304 |
Extra for providing mechanical device, chain and crank operation
for operating rolling shutters - |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Exceeding 10.00 sqm and upto 16.80 sqm in area. |
sqm |
Rs.440.20 |
|
|
|
|
(Rupees four hundred forty and paise twenty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Exceeding 16.80 sqm in area. |
sqm |
Rs.594.50 |
|
|
|
|
|
(Rupees five hundred ninety four and paise fifty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
305 |
Providing and fixing in position collapsible steel shutters with
vertical channels 20x10x2mm and braced with flat iron diagonals
20x5mm size with top and bottom rails of T-iron 40x40x6mm with
40mm dia. steel pulleys complete with bolts, nuts, locking
arrangement, stoppers, handles, including applying a priming
coat of approved steel primer. |
sqm |
Rs.2,908.60 |
|
|
|
(Rupees two thousand nine hundred eight and paise sixty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
306 |
Providing and fixing steel glazed doors, windows, ventilators of
standard rolled steel sections, joints, mitered and welded with
15x3mm lugs 10cm long embedded in cement concrete blocks
15x10x10cm size of 1:3:6 (1 cement : 3
coarse sand : 6 stone aggregate 20mm nominal size)
or with wooden plugs and screws or rawl plugs and screws or with
fixing clips or with bolts and nuts as required, including
providing and fixing of glass panes with glazing clips and
special metal sash putty of approved make complete including
applying a priming coat of approved steel primer excluding the
cost of metal beading and other fittings except necessary hinges
or pivots as required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 3mm thick glass panes. |
sqm |
Rs.1,950.40 |
|
|
|
|
|
(Rupees one thousand nine hundred fifty and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 4mm thick glass panes. |
sqm |
Rs.2,069.10 |
|
|
|
|
|
(Rupees two thousand sixty nine and paise ten) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Using 5mm thick glass panes. |
sqm |
Rs.2,137.60 |
|
|
|
|
|
(Rupees two thousand one hundred thirty seven and paise sixty)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(d) |
Using 4mm thick frosted glass panes. |
sqm |
Rs.2,114.70 |
|
|
|
|
(Rupees two thousand one hundred fourteen and paise seventy)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
307 |
Providing and fixing steel glazed fixed windows, ventilators of
standard rolled steel sections, joints, mitered and welded with
15x3mm lugs 10cm long embedded in cement concrete blocks
15x10x10cm size of 1:3:6 (1 cement : 3
coarse sand : 6 stone aggregate 20mm nominal size)
or with wooden plugs and screws or rawl plugs and screws or with
fixing clips or with bolts and nuts as required, including
providing and fixing of glass panes with glazing clips and
special metal sash putty of approved make complete including
applying a priming coat of approved steel primer excluding the
cost of metal beading and other fittings. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 3mm thick glass panes. |
sqm |
Rs.1,890.40 |
|
|
|
|
|
(Rupees one thousand eight hundred ninety and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 4mm thick glass panes. |
sqm |
Rs.2,009.10 |
|
|
|
|
|
(Rupees two thousand nine and paise ten) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Using 5mm thick glass panes. |
sqm |
Rs.2,077.60 |
|
|
|
|
|
(Rupees two thousand seventy seven and paise sixty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(d) |
Using 4mm thick frosted glass panes. |
sqm |
Rs.2,054.70 |
|
|
|
|
|
(Rupees two thousand fifty four and paise seventy) only. |
|
|
|
|
|
|
308 |
Providing and fixing M.S. Grills with 16mm flats M.S. of desired
sections, fixed and welded in position in the
pre-fabricated steel framed windows etc. including applying
priming coat etc. complete. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 3mm thick section. |
sqm |
Rs.1,086.50 |
|
|
|
|
|
(Rupees one thousand eighty six and paise fifty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 4mm thick section. |
sqm |
Rs.1,149.10 |
|
|
|
|
|
(Rupees one thousand one hundred forty nine and paise ten) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Using 5mm thick section. |
sqm |
Rs.1,587.10 |
|
|
|
|
|
(Rupees one thousand five hundred eighty seven and paise ten)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
309 |
Providing and fixing M.S. Grills with 16mm flats M.S. of desired
sections, fixed with screws in position in wooden frames of
windows etc. including applying priming coat of approved steel
primer etc. complete. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 3mm thick section. |
sqm |
Rs.991.60 |
|
|
|
|
|
(Rupees nine hundred ninety one and paise sixty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 4mm thick section. |
sqm |
Rs.1,049.10 |
|
|
|
|
|
(Rupees one thousand forty nine and paise ten) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Using 5mm thick section. |
sqm |
Rs.1,451.20 |
|
|
|
|
|
(Rupees one thousand four hundred fifty one and paise twenty)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
310 |
Providing and fixing M.S. grills of required pattern in wooden
frames of windows, etc. with M.S. flats, square or round bars
etc. complete. |
kg |
Rs.57.40 |
|
|
|
(Rupees fifty seven and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
311 |
Structural steel work rivetted or bolted in built up sections,
trusses and framed works, including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer
all complete. (in tees, R.S. joists, angles,
flats and channels.) |
kg |
Rs.58.10 |
|
|
|
(Rupees fifty eight and paise ten) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
312 |
Structural steel work welded in built up sections, trusses and
framed works, including cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer all
complete. (in tees, R.S. joists, angles,
flats and channels.) |
kg |
Rs.67.40 |
|
|
|
(Rupees sixty seven and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
313 |
Providing and fixing M.S tubular section in built up section of
truss welded in position including cutting, hoisting, fixing in
position and applying priming coat with approved steel primer
etc. complete. |
kg |
Rs.77.50 |
|
|
|
(Rupees seventy seven and paise fifty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
314 |
Supplying and fixing M.S. decorative railing 80cm high in
staircase consisting of 25mm alluminium square sections inserted
into 20mm dia. M.S. bars @ 30 cm centres 60 x 60 x 4mm thick
plate at the base fixed with wooden wedge by I.W. screws to
receive the wooden handrails 12.5cm x 10cm including cost of
polishing the wooden rail. |
Rm |
Rs.928.20 |
|
|
|
(Rupees nine hundred twenty eight and paise twenty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
315 |
Providing and fixing hand railing of 40mm nominal bore GI pipe
with ballustards of 16mm dia HYSD bars placed at 10cm spacing
welded together and a minimum height of 0.8m for staircase
railing, balcony railing, parapet railing etc. including
applying steel priming coat and steel painting complete. |
Rm |
Rs.762.40 |
|
|
|
(Rupees seven hundred sixty two and paise forty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
316 |
Providing and fixing prefabricated M.S. equal angle in chaukhat
for doors, windows and clerestory windows including fixing with
40 x 5mm M.S holdfast 40cm long at required spacing and applying
priming coat with approved steel primer etc. complete. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Using 50 x 50 x 5mm M.S. angle. |
Rm |
Rs.272.90 |
|
|
|
|
|
(Rupees two hundred seventy two and paise ninety) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Using 50 x 50 x 6mm M.S. angle. |
Rm |
Rs.303.60 |
|
|
|
|
|
(Rupees three hundred three and paise sixty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
317 |
Providing and fixing swing doors, windows and ventilators
fabricated from Roll formed sections made of pre-painted steel
including handle made of high grade alluminium powder coated and
with nylon receiver, gaskets made of ethyl propylene diamine
monomer, corner brackets made of CRCA with zinc phosphating,
mullion caps made of glass filled nylon, frames fixed by using
self expanding screws but excluding cost of glasses. (base steel
as per IS : 513 of 0.6mm thick 'D' quality, galvanised as per IS
: 277 with zinc of 150 GM/sqm. Sections for shutters should be
46x46mm and external frame should be 46x52mm, section for glass
beading should be 18x25mm and centre mullion should be 46x70mm). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(a) |
Doors. |
sqm |
Rs.3,186.50 |
|
|
|
|
|
(Rupees three thousand one hundred eighty six and paise fifty)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(b) |
Windows / combined windows & ventilators. |
sqm |
Rs.3,131.40 |
|
|
|
|
(Rupees three thousand one hundred thirty one and paise forty)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
(c) |
Ventilators only. |
sqm |
Rs.4,561.60 |
|
|
|
|
|
(Rupees four thousand five hundred sixty one and paise sixty)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
318 |
Providing and fixing curtain glazing fabricated from Roll formed
sections made of pre-painted steel including fixing with gaskets
made of ethyl propylene diamine monomer, corner brackets made of
CRCA with zinc phosphating, mullion caps made of glass filled
nylon, frames fixed by using self expanding screws but excluding
cost of glasses.(base steel as per IS : 513 of 0.8mm thick 'D'
quality, galvanised as per IS : 277 with zinc of 150 GM/sqm.
Sections for external should be 46x52mm, centre mullion should
be 46x70mm and for fixing glass should be 18x25mm). |
sqm |
Rs.3,172.50 |
|
|
|
(Rupees three thousand one hundred seventy two and paise fifty)
only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
319 |
Providing and fixing structural glazing fabricated from Roll
formed sections made of pre-painted steel including fixing with
self expanding screws but excluding cost of glasses (base steel
as per IS : 513 of 0.6mm thick 'D' quality, galvanised as per IS
: 277 with zinc of 150 GM/sqm. Sections should be 50x100mm for
verticals 33x58mm for horizontals and glass holding sections
should be 32.5x37mm for top and bottom grids, in between should
be 32.5x18mm), the glass holding section made of 304 grade
stainless steel of 0.8mm thick. CRCA sections with polyurithene
coating are to be used as stiffeners inside the PPS sections as
per design requirement. |
sqm |
Rs.4,537.80 |
|
|
|
(Rupees four thousand five hundred thirty seven and paise
eighty) only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
320 |
Providing and fixing a pair of flat iron brackets in concrete
work while laying for jointing with timber post etc. including
cost of bolts and nuts complete. |
pair |
Rs.84.90 |
|
|
|
(Rupees eighty four and paise ninety) only. |
|
|
|
|
|
|
|
